Tram 1486 UHF Fiberglass Base Antenna w/Mounting Kit

Product was successfully added to your shopping cart.

Details

The Tram 1486 is a high performance UHF fiberglass Base Antenna with a 200 watt power rating. This single section antenna is 5'3" tall and is rated for 135mph maximum winds.

The Tram 1486 is intended to be custom tuned to a specific frequency. A cutting chart is included to enable you to more easily do this yourself. We also offer a custom tuning service, where we will tune the antenna for your frequency or frequency range. If you select our tuning service, please specify your frequency in the Comments field during checkout. Please note, this product is not refundable once it has been tuned.

UHF fiberglass base antenna
5'3" (1.6m) tall
Single section
5/8 wave 3 elements
7" (19.5cm) radial length
406-512MHz
10MHz bandwidth
6.5 dBd gain
Radiator and coil are hermetically sealed in fiberglass tubing for low SWR in all weather
DC ground construction allows static dissipation for low noise ratio and maximum lightning protection
Mast diameter accepted is 1 3/16" to 2 7/16" (30-62mm)
UHF (SO-239) connector
Max power 200 watts
50 ohms
Maximum wind 135mph (60 m/sec)
Includes cutting chart

Additional Information

Color	White
Warranty	1 Year
Service / Frequency	Amateur, Business, UHF
Number of Bands	Single Band
Connector	UHF Female (SO-239)
Mount Type	Fixed Base
Includes Cable/Mount	No

Worked great review by Nanuk on 5/14/2024

Rating

I purchased this antenna because of the reviews on YouTube. Other YouTube videos suggested other ones are better. I connected it to my repeater, tested it out, and it worked fine. Didn't need to spend more money on a "better" one. If it's not broke don't fix it.
Nice Antenna but they screwed it up when I paid for the "Custom Tuning Service" review by Richard on 4/26/2024

Rating

I paid to have my antenna tuned with an SWR reading of 3.4! When I called them their answer was for me to tune it. Antenna, shipping. and tuning.

I'm not happy and they had every opportunity to fix the problem. Now I have a bunch of hardware I purchased from them with a POS antenna!
Tram 1486 and Great Service review by VonH on 2/5/2024

Rating

I have made several purchases from BuyTwoWayRadio.com and have been pleased with all of the products and the service. Spoke with a Technician for some recommendations and Anthony for Customer service once. I have always been pleased. The 1486 Is PERFECT for the GMRS base station. I had them tune it and it is perfect.
Good products good people review by NickG on 1/21/2024

Rating

Quality products backed by quality business and people
Good and decent antenna review by Theasian on 7/25/2023

Rating

Not much to say other than that it works. Elected to get it tuned and sent to me. Tested with my GMRS radios and it does the job.
Tram 1486 UHF fiberglass base antenna review by Varedneck on 5/28/2023

Rating

Great antenna, I can reach a repeater 35 miles away with the Wouxun KG- 935G Plus with 5.5 watts. Now have the Wouxun KG-XS20G Plus hooked to it and it’s great. Looking forward to installing the Wouxun KG-1000G Plus to it. Telling all my friends about this antenna and good it is. Just remember to have Buy Two Way Radios cut it for you, it is spot on
Tram 1486 great GMRS UHF base antenna. review by SCOTT on 5/5/2023

Rating

I had the antenna tune very pleased with it.
17-Miles on 5-Watts review by LDS Prepper on 10/15/2022

Rating

Trying to help a family get connected in an emergency we were only getting spotty, mostly unreadable transmissions. The Tram 1846 antenna saved the day. Once we got it tuned, which took very little time by using the Surecom SW-102 SWR/Power Meter, sold on this site, we hit 17-miles and it sounded like we were standing next to each other. Love the product. Love the customer service and tech support.
Great and easy to tune review by NICHOLAS on 4/25/2022

Rating

Very pleased with this antenna, I got this for the GMRS bands and following the cut chart it was got a SWR of 1.2 by tuning it for 458MHz and working up to 460MHz. Definitely a lot easier to do precisely with something that measures in millimeters, used a tape measure to get the whole inches and calipers to get that that last faction of an inch.